Microcurrent Energiser Mask

The Microcurrent Energising Mask is a sheet mask that uses breakthrough silver ion conductive print technology. The mask is made of 100% Lenzing Tencel Luxe fabric which is sustainably sourced and biodegradable. The mask is printed with an electronic circuit that when activated by a CACI treatment system delivers microcurrent energy to rejuvenate the skin. Each mask is single use and can be a stand-alone 10-minute skin treatment or combined within a CACI facial treatment. 

To perform treatment the following additional items are required: 

• CACI microcurrent system– supplied separately
• Cable with magnetic connectors – supplied separately   
• Super Charge Energiser sachets – supplied separately
• Applicator brush – supplied separately

Directions

Pour 1 x Super Charge Energiser sachet into a small pot of water (60-80ml) and mix until the solution is clear.
Use an applicator brush to paint the face with Super Charge Energiser solution.
Place the Microcurrent Energising Mask (CACI logo side up) over the face.
Use an applicator brush to coat the Microcurrent Energising Mask with Super Charge Energiser solution.
As the solution is applied the mask should turn transparent and the printed microcurrent circuit and CACI logo should become more prominent.
Attach the cable with magnetic connectors to the two marked magnetic attachment points on either side of the mask. (either connector can be attached to either attachment point)

CACI system (Classic, Quantum, Ultra, Ultimate, Synergy)

• Insert the plug end of the magnetic cable into the ETR/Micro socket. 
• Quantum system: plug into the Micro Probe + socket
• Select Program: ETR
• Select Treatment Course: 8 +
• Select Start to commence the treatment program.

CACI Micro system

• Insert the plug end of the magnetic cable into either the channel A or B socket.
• Select the corresponding Channel: A or B
• Select Mode: Lines
• Select Intensity: Highest level